|
Model |
KD8132AW KD8133AW KD8134AW KD8135AW KD8136AW KD8137AW KD8138AW |
|
|
Pass weight |
100mm 150mm 200mm 250mm 300mm 350mm 400mm |
|
|
Maximum pass width |
650mm |
|
|
Detection sensitivity |
Fe ball |
φ0.5mm φ0.6mm φ0.65mm φ0.7mm φ0.8mm φ0.9mm φ1.0mm |
|
SUS304 ball |
Φ1.1mm φ1.3mm φ1.35mm φ1.4mm φ1.6mm φ1.8mm φ2.0mm |
|
|
Belt width |
550 mm |
|
|
Display |
STN LCD |
|
|
Operation method |
Flat pannel key |
|
|
Preset memory |
100 |
|
|
Belt speed |
27 m/min（The same kind of products can adjust the speed） |
|
|
Maximum product weight |
50 kg [up to 15 kg through the selection. However, the conveyor belt speed is 5 ~ 49 m/min] |
|
|
Power requirements |
AC 100 ~ 120 V + 10%-15% or AC 200 ~ 240 V + 10%-15%, single phase, 50/60 Hz, 400va, inrush current 62 A (typ) (less than 20 ms) |
|
|
Mass |
175kg |
|
|
Environmental condition |
0 ~ 30 ~ 40 ℃ relative humidity 85%, but no condensation |
|
|
Protection class |
IP66 compliance |
|
|
Casing materials |
Stainless steel (SUS304) |
|
|
Data output |
Standard equipment USB port (USB 2.0), Ethernet interface (10-t, 100-tx) |
|
Note 1)Actual detection sensitivity is according to the type of foreign objects, The physical characteristics (temperature, content, shape, etc.) of the tested products and the environment.In addition, part of the detection sensitivity is marked according to the calculated value, and the corresponding test piece may not be prepared.
Note 2) The total weight of the measured item on the conveyor belt
