X-ray machine for inspecting bulk products
The X-ray foreign objects detector i is used to detect small foreign objects mixed into products, such as metals, sand, stones, shells, glass, pearls and high-density plastics. With shielding, lack of product testing, product inspection, and other functions, 15 inches color touchscreen customer-facing simple operation interface, has the sensitivity adjustment and automatic tracking function in production, new carry nformation management and maintenance functions, low standard Ethernet USB drive connected,convenient information management. The terminal conveyor belt is easy to handle. Comply with HACCP management requirements. This equipment does not use X - ray leakage protective curtain when working, it is most suitable for foreign matter detection of unpacked and bulk products.
Note: 1) Hair, insect, cartilage, wood, paper, fiber, low density plastic cannot be detected.
2) Detection sensitivity is related to the state of the product and product. Different products have different sensitivity and different sensitivity.
|
Model |
KD7405ABWH |
KD7416ABWH |
|
Maximum sensitivity |
metal ball is 0.3mm and the metal wire is 0.2mm |
|
|
X-ray output |
The catheter voltage is 25 ~ 60 kV, the catheter current is 0.3 ~ 7.0 mA, and the output is 7.5 ~ 210 W |
|
|
security protection |
1. Under Sv/h, the X-ray leakage is prevented by the safety protection device |
|
|
Display |
15-inch color TFT LCD display |
|
|
Operation mode |
Touch screen (with touch buzzer) |
|
|
Products size |
The maximum width is 240 mm and the maximum height is 50 mm |
The maximum width is 390mm and the maximum height is 50mm |
|
The belt width |
270 mm |
420mm |
|
Shielding function |
Standard specifications |
|
|
Defective inspection function |
Standard specifications |
|
|
Clip inspection function |
Standard specifications |
|
|
Preset memory |
Up to 100 |
|
|
Belt speed |
5 ～ 60 m/min、most5 kg |
|
|
61 ～ 90 m/min、most2 kg |
||
|
5 ～ 40 m/min、most10 kg（Part selection correspondence） |
||
|
Power requirements |
AC100 ~ 120 V or AC200 ~ 240 V, single phase, 50/60 Hz, 1.0kva, inrush current 80a (typ) (less than 5ms) |
|
|
Mass |
210 kg |
|
|
Environmental conditions |
0 to 35 ℃ (0 ~ 40 ℃) when equipped with optional air conditioning 30 ~ 85% relative humidity, but not condensation |
|
|
External finish |
It meets the IP66 standard (only the conveyor belt part and other parts meet the IP40 standard), and can be used as a buckle to remove and install the belt |
|
|
Casing materials |
Stainless steel（SUS304） |
|
Note 1) the detection sensitivity during actual use varies with the type of foreign matter, the physical characteristics of the object under test (content object contour, etc.) and the use environment.
Note 2) according to the length of the object under test, protective curtain should be installed at the entrance and exit.
Note 3) the product of the same kind can adjust the speed.
Note 4) the total weight of the measured item on the conveyor belt.
Note 5) the voltage used is the terminal switch. In addition, the marked inrush current value is AC200 V. It varies with the voltage used.
Note 6) the allowable range of voltage variation is within + / - 10%.
Note 7) power consumption is different when equipped with air conditioning.
Note 8) it may be necessary to install air conditioning due to the use environment.
Note 9) the local noise is 77 dB (A).
