|
Model |
KDS4505ABW KDS4510ABW KDS4513ABW KDS4515ABW KDS4518ABW |
|
|
Pass weight |
45mm 95mm 125mm 145mm 175mm |
|
|
Maximum pass width |
450 mm |
|
|
Detection sensitivity note1 |
Fe ball |
φ0.35mm φ0.4mm φ0.45mm φ0.5mm φ0.5mm |
|
SUS304 ball |
φ0.75mm φ0.85mm φ0.9mm φ0.9mm φ1.0mm |
|
|
Belt width |
350 mm |
|
|
Display |
7 inch color TFT LCD |
|
|
Operation method |
Touch screen (start/stop/home button is the direct button) |
|
|
Preset memory |
200 |
|
|
Belt speed |
5～73m/min（The same kind of products can adjust the speed） |
|
|
Transmitting it note2 |
5 kg［It can be up to 15 kg through the selection. However, the conveyor speed is 5 ~ 49 m/min］ |
|
|
Power requirement |
AC 100 ~ 120 V + 10%-15% or AC 200 ~ 240 V + 10%-15%, single phase, 50/60 Hz, 200 VA, inrush current 62 A (typ) (less than 20 ms) |
|
|
Mass |
102kg |
|
|
Environmental conditions |
0 ~ 30 ~ 40 ℃ relative humidity 85%, but no condensation |
|
|
Protection class |
IP66 compliance |
|
|
Casing materials |
Stainless steel (SUS304) |
|
|
Data output |
Standard equipment USB port (USB 2.0), Ethernet interface (10-t, 100-tx) |
|
Note 1) Actual detection sensitivity is according to the type of foreign objects, The physical characteristics (temperature, content, shape, etc.) of the tested products and the use environment. In addition, part of the detection sensitivity is marked according to the calculated value, and the corresponding test piece may not be prepared.
Note 2)The total weight of the measured item on the conveyor belt.
